English    Chinese    Favorites
Stellite Products
Nickel Base Power
Tungsten Carbide Spray Powder
Thermal Spraying Molybdenum Wire
Tungsten & Molybdneum Products
Tungsten Carbide Tools
High Temperature Furnace Parts
Powder Metallurgy Products

Cemented Tungsten Carbide

( CNC insterts,drillers, cutters, millers)

Materials list , customized can be make.

GRADE GRAIN (u) DENSITY(g/cm3)+/-0.1 HARDNESS(HRA)+/-0.5 T.S(N/mm2) APPLICATION
YG3X 0.6-0.8 15.2 92.5 2060 end grain WC alloy, better abrasion resistance, Machining of chilled alloy cast irons and refractory alloy steel or finishing of ordinary cast irons
YG6X 0.6-0.8 14.88 91.5 2150
YG10X 0.6-0.8 14.6 90.5 2250
YG12X 0.8-1.0 14.25 90 2300
K15 0.8-1.0 14.8 91 2600
YG3 0.6-0.8 15.2 92 1600 Better abrasion resistance, suit for end finish or semi-end finish machining without interrupted and thread machining or drill machining: cast iron, ferrous metals and its alloys and machining .
K01 0.6-0.8 14.8 93 2400 suit for end finish or semi-end finish machining: cast iron, ferrous metals and its alloys. And better for making solid tools.
K02 0.8-1.0 14.5 92.5 2600 With high hardness, high tensile strength, its better for making boring tools and cutters. Both suit for end finish or semi-end finish machining: cast iron, ferrous metals and its alloys.
K03 1.2-1.4 14.35 91.8 2800 With excellent toughness and high tensile strength, its better for making boring tools and cutters. Both suit for rough finish machining or heavy cutting/milling: cast iron, ferrous metals and its alloys.
K10 1.0-1.2 14.85 91.5 2000 Better abrasion resistance and few impact resistance, vibration, suit for end finish or semi-end finish machining: cast iron, ferrous metals and its alloys, non-metals.
K20 1.0-1.2 14.8 91 2000
K25 1.0-1.4 14.75 91.8 2300 With mixed grains and high tensile strength,it has better impact resistance and vibration, suit for rough finish machining with lower speed: cast iron, ferrous metals and its alloys.
K30 1.0-1.4 14.7 90.5 2200
K45 1.6-2.4 13.9 89.5 2600 With high tensile strength and better impact resistance, its better for rough machining and heavy cutting the cast iron.
P01 0.8-1.0 13.1 92.6 1850 With high tensile strength under high temperature and better abrasion resistance, its better for continually machining the high strength steel.
P02 0.8-1.0 12.2 92.3 1950 With better toughness and high vibration cracks resistance and plastic deformation resistance under high temperature, its better for machining the alloy constructional steel, alloy tool steel, high-Mn steel and stainless steel.
P03   12.6 91.2 2300 With better hot hardness, better vibration cracks resistance and better hardness, it's a common materials, suit for rough machining:steel and cast iron
P04   13.05 90.6 2400 With better hot hardness, better impact resistance and good using strength. It's better for maching high strength steel, suit for rough vertical miller, indexable inserts and saws.
P05   12.45 91.4 1600 Suit for continually rough milling and cutting: cast iron, forging steel.
P06   12.45 91.8 2450 With better using strength and better impact resistance. Suit for semi-finish maching: hot steel, high-Mn steel, stainless steel.
P20   11.3 92.8 1850 With better using strength and better impact resistance and vibration cracks. Suit for rough maching and milling without interrupted cuts or semi-end milling or cutting may interrupted: carbon steel, alloy steel.
P25   12.85 91.8 1900 Suit for rough milling,drilling and cutting and deep drilling: carbon steel, forging steel, Mn steel,high strength steel and alloy steel.
P30   12.75 91.8 2100 With better impact resistance and vibration cracks. Suit for rough maching and milling, cutting: carbon steel, forging steel, Mn steel,high strength steel and alloy steel.
P40   12.75 91.5 2150 With better rough and vibration cracks resistance. Suit for cutting,milling at low, meidum and high-rate speed .
YT5   12.85 90.3 2300 Suit for rough milling, cutting: carbon steel,l and alloy steel.
YT15   11.2 93 1700 Suit for semi-end maching without interrupted cutting and milling: carbon steel, eel and alloy steel.
APFT1504FFF
APKT1604PDER
APMT11T302
APMT1604H2
APMT1604M2
C26417D
CCGT09T302
CCMT09T304
CCMT120408-HR
CNMG120404-ZR
CNMG120408-80
DCMT11T304-ZM
DNMG150608-TR
HD
KNUX160405R-L
OFCT070610
OPUT050402
PD361208
QD01
RCKT10T3MO-SL
RCMT200600
RDMT1204MO
RPMT1606MO-SL
SCMT120408-ZM
SDMT1505ZDTN
SEKR1203AFSN
TNGF2204T
TNMG16T304
TNMM220412-M
TNUA160404-T10
TPMT1405
VCGT160404
VCMT160404-V
VNGT220520
WNMA080408
WNMA080408YI
WNMG080404-TR
ZCGT1608
XSPUR120308-ZM
XTCUT16T308
Tel:+86-757-83991121,13923138208  Fax:+86-757-83307699
Copyright 2002 - 2020 © FOSHAN CHANGKAI INDUSTRIAL CO.,LTD.
E-mail: conneyyang@changkaiindustry.com  sale@changkaiindustry.com    
Business Address:RM.711, SHIJIMINGXUAN BLDG., NO.30 JIHUA ROAD, FOSHAN, GUANGDONG.

Factory Address:NO.8 Wangming Road, Haowang industrial zone, Wenjiang district, Chengdu,Sichuan,China.

粤ICP备11033141号